NetPing Issued the Software Update DKSF 70.5.3 DKSF 71.5.3 for the devices UniPing server solution v4/SMS and UniPing server solution v3

Firmware Version DKSF 70.5.3 DKSF 71.5.3 from 17.02.2016:

• A notification about resetting the parameters of a device into default settings by the button «Reset» is added;
• A TCP client and a module for sending e-mail notifications are updated, as a result, a probability of failures of a device when sending long e-mail notifications (reports) is decreased;
• A possible mismatch of a real relay status and a relay status that is specified in the firmware on certain devices after start/reboot of a device up to the first switching of a relay is eliminated;
• Notations of an operation mode of IO lines in periodic SMS reports about a status of sensors, IO lines, and relays are updated. Now an operation mode of IO lines is denoted the next way: I1=0 O2=1 O3=0, where I is an «input», O is an «output»/«logic output»;
• A support of four humidity sensors is added to the module «Thermo(Hygro)stat» at the page «LOGIC» of a device web interface. In a previous firmware version «Thermo(Hygro)stat» was impossible to adjust for the readings of a relative humidity from humidity sensors;
• URL-encoded commands (HTTP API) for humidity sensors has been changed:
  • requesting readings and a status of a relative humidity:
    /relhum.cgi?hn
    where: n is a number of a humidity sensor channel (from 1 to 4)
  • requesting readings and status of a temperature:
    /relhum.cgi?tn
    where: n is a number of a channel of a humidity sensor (from 1 to 4)
• An issue of confused SNMP TRAP notifications from humidity sensors is resolved. In a previous firmware version the checkboxes «Use common snmpTrapOID for all events» and «Use common snmpTrapOID for all channels» were confused in places;
• An information about four humidity sensors is added to a periodic e-mail report about a status of sensors, IO lines and relays;
• English page of humidity sensors is translated according to the Russian one and is now totally workable;
• A text format of a periodic e-mail report about a status of sensors, IO lines and relays is updated. Displaying of a status of IO lines in the mode «logic output» is fixed;
• Notifications from 1-Wire smoke sensors are fixed: previously a failure of any 1-Wire smoke sensor has been registered as a failure of a 1-Wire smoke sensor on the first channel;
• The issue of incorrect forming a periodic e-mail report about a status of sensors, if no sensors are included in a report, is eliminated. Now instead of a block of random symbols, an empty report is sent with the text «- empty report -»;
• 1-Wire smoke sensors are integrated into the module «Logic». Now using the signals from 1-Wire smoke sensors, it is possible to execute automated tasks, for example, switch on the equipment for sound and light warning when sensors are triggered;
• The issues at work with a web interface through a TCP tunnel are eliminated, which appeared because of exceeding MTU 1500 bytes while saving the settings at the page /settings.html

A NetPing company recommends updating firmware of the devices UniPing server solution v4/SMS and UniPing server solution v3 to the latest version. The updates are available on the official website in the section «Documentation and Files». We hope that updating of a new firmware version will increase the quality and reliability of the operation of devices of remote monitoring of server rooms.

Contacts

netpingdevice.com - we develop, manufacture and sell monitoring devices for server rooms as well as for a remote monitoring.
Phone: +886-2-23121582
7F.-2, No.25, Sec. 1, Zhonghua Rd., Zhongzheng Dist., Taipei City 100, Taiwan (R.O.C.)
sales@netpingdevice.com