Buzzer (mod.STD-3025)

A device of power supply sockets remote management via Ethernet/Internet network (IP power distribution unit) with SMS management support.

• 4 controllable sockets (IEC320-C13);
• 2 x 10/100-BASE-TX Ethernet ports;
• A built-in 3G GSM modem for SMS management and notification;
• Built-in ionistor for the operation of the warning system in the absence of 220 V;
• Ability to connect the battery module;
• A metal body for installing into a 10' rack 1U or mounting on a flat surface;
• External 1-wire sensors can be connected: temperature, humidity, supply voltage, analog sensor adapter;
• 6 I/O lines for connecting external sensors of "dry contact" type;
• Operating temperature range: -30...50 °C (no condensation, normal humidity).

A device of power supply sockets remote management via Ethernet/Internet network (IP power distribution unit) with SMS management support.

• 4 controllable sockets (JT-G45-120-4P, “Schuko” sockets, Type F);
• 2 x 10/100-BASE-TX Ethernet ports;
• A built-in 3G GSM modem for SMS management and notification;
• Built-in ionistor for the operation of the warning system in the absence of 220 V;
• Ability to connect the battery module;
• A metal body for installing into a 10' rack 1U or mounting on a flat surface;
• External 1-wire sensors can be connected: temperature, humidity, supply voltage, analog sensor adapter;
• 6 I/O lines for connecting external sensors of "dry contact" type;
• Operating temperature range: -30...50 °C (no condensation, normal humidity).
  

A device of power supply sockets remote management via Ethernet/Internet network (IP power distribution unit).

• 4 controllable sockets (JT-G45-120-4P, “Schuko” sockets, Type F);
• 2 x 10/100- BASE-TX Ethernet ports;
• A metal body for installing into a 10' rack 1U or mounting on a flat surface;
• External 1-wire sensors can be connected: temperature, humidity, supply voltage, analog sensor adapter;
• 6 I/O lines for connecting external sensors of "dry contact" type;
• Operating temperature range: -30...50 °C (no condensation, normal humidity).

This is a device for remote sensor monitoring via the Ethernet/Internet on a DIN rail. It allows you to receive information about the status of sensors and notifications about triggering of sensors, to control connected devices remotely.

• A compact case for mounting on a DIN rail;
• 1-wire sensors support;
• 16 Input and 4 Output lines for connecting external sensors and controlling external devices;
• 4 built-in low voltage relays;
• RS-232/485 port (TCP-COM);
• Support for external sensors: temperature sensors, humidity sensors, door metal sensors, liquid sensors, smoke detectors, supply voltage sensors and so on;
• 2 х 10/100-BASE-TX Ethernet ports;
• Power supply of the device using a 12V 2A power supply unit or an external module for NetPing 85M2 batteries.

This device is for remote monitoring of sensors via the Ethernet/Internet network. It allows you to control external devices and receive information about the conditions of sensors and notifications about a sensor status remotely.

• 2 х 10/100-BASE-TX Ethernet ports;
• A metal case with brackets for mounting on a DIN rail;
• 4 built-in 24 V changeover relays with an indication for switching;
• A built-in temperature sensor;
• 1-wire sensor support;
• 4 Input lines for connecting sensors of a “dry contact” type;
  
• External sensors are supported: temperature, humidity, door metal, liquid, voltage supply, motion and so on;
• Power of the device from POE (Power over Ethernet) or using a 12V 2А power battery.

This device is for remote monitoring of sensors via the Ethernet/Internet network. It allows receiving information about the status of sensors and notifications about sensor triggering remotely.

• A metal case for mounting on a 19' 1U rack;
• 1-Wire sensors support;
• 12 IO lines for connecting external sensors and controlling external devices;
• An analog input 0–30 mA, 0–30 V, 0–30 kOhm;
• Two built-in low voltage relays;
• Built-in GSM3G modem;
  
• 2 х 10/100-BASE-TX Ethernet ports.

This device is for remote monitoring of sensors via the Ethernet/Internet network. It allows receiving information about the status of sensors and notifications about sensor triggering remotely.

• A metal case for mounting on a 19' 1U rack;
• 1-Wire sensors support;
• 12 IO lines for connecting external sensors and controlling external devices;
• An analog input 0–30 mA, 0–30 V, 0–30 kOhm;
• Two built-in low voltage relays;
• 1 х 10/100-BASE-TX Ethernet port.

This device is for remote monitoring of sensors via the Ethernet/Internet network. It allows receiving information about the status of sensors and notifications about sensor triggering remotely.

• A metal case for mounting on a 19' 1U rack;
• 1-Wire sensors support;
• 12 IO lines for connecting external sensors and controlling external devices;
• An analog input 0–30 mA, 0–30 V, 0–30 kOhm;
• Two built-in low voltage relays;
• Built-in GSM3G modem;
  
• 1 х 10/100-BASE-TX Ethernet port.

A device of power supply sockets remote management via Ethernet/Internet network (Switched Metered ATS IP PDU) with SMS management support.

• 8 controllable 100V ... 240V AC, 50/60 Hz sockets;
  
• 2 independent power supply inputs (automatic and switching between the inputs by a command);
• 2 x 10/100-BASE-TX Ethernet ports;
• A built-in 3G GSM modem for SMS management and notification;
• A metal body for installing into a 19' rack 1U;
• External sensors can be connected: temperature, humidity, door, leakage, supply voltage and other

• The smallest device, without a case, in heat-shrinkable cambric;
• 2 IO-lines and 2 Input-lines to connect external sensors or to manage external devices;
• 2 х 10/100-BASE-TX Ethernet-ports;
• It is possible to plug the next external sensors: door, leakage, 220V availability, shock, motion, light, airflow, smoke detector combined smoke/heat;
• The next external devices are connected: power relay, alarm siren, light sensor and controlled socket NetPing AC/DIN;
• The device is powered using Power adapter 12V 0.5A or POE splitter 12V (an analog of a power supply unit). The Ethernet ports on the device cannot be used for PoE power.

A device of power supply sockets remote management via Ethernet/Internet network (Switched Metered ATS IP PDU) with SMS management support.

• 8 controllable 100V ... 240V AC, 50/60 Hz sockets;
• 2 independent power supply inputs (automatic transfer switch);
• 1 x 10/100-BASE-TX Ethernet ports;
• A built-in 3G GSM modem for SMS management and notification;
• A metal body for installing into a 19' rack 1U;
• External sensors can be connected: temperature, humidity, door, leakage, supply voltage and other.

A Remote Power Distribution Unit (IP PDU) with controls over Ethernet and SMS

• 2 independently controlled "computer" power sockets C13 (100V .. 250V);

• a plastic compact case;

• connectors for external sensors: temperature, humidity, leakage, door open / close, power supply, and more;

• a built-in 3G GSM modem for SMS control and SMS notifications;

• Ethernet ports 10/100-BASE-TX;

• an operating temperature range: -30°C .. +50°C (non-condensing, normal air humidity);

• a built-in ionistor (supercapacitor) to send notifications in case of a main power supply failure.