Humidity sensor WS-2
A relative humidity sensor for measuring relative humidity in % and a built-in temperature sensor.
A humidity sensor WS-2 is designed to measure air humidity indoors. It is manufactured as a board, installed into a plastic cover.
An air relative humidity sensor is connected to the following devices NetPing 2/PWR-220 v3/ETH, NetPing 2/PWR-220 v1/SMS, NetPing 2/PWR-220 v2/SMS. The information about connecting a humidity sensor is in the document "User Guide" for a device Netping/UniPing, to which they are connected. The information about a sensor configuration is in the document "Firmware Description" for a device Netping/UniPing, to which you are connecting a humidity sensor.
A loop of a sensor consists of 4 wires that transmit a digital information about a humidity and a temperature. The loop is connected inseparably to a sensor and is 2 meters long. If necessary, it is possible to make a loop sensor longer up to 10 meters using RC-4 sensor loop extender plugged one into another.
A humidity sensor is constructed based on the chip HIH6031-021 (technical specifications of the sensor).
Detailed information about a relative air humidity you can find in the article: Relative humidity.
|Device dimenstions||35 x 23 x 15|
|Sensor cord length||2 m.|
|Thermal range||-40°C .. 100°C|
|Water proof case||No|
|Humidity range||0% .. 100%|
|Precision measurement of humidity||±4,5%|
|Device suit||Sensor, zip package|
NetPing 2/PWR-220 v2/SMS
NetPing 2/PWR-220 v1/SMS
NetPing 2/PWR-220 v3/ETH