PIR detector (mod.M105-1E)
- 26.00 USD
A motion sensor is designed to register movement. Allows to register any movement in a 10 meters area. It is connected to NetPing server room environmental monitoring solutions.
- It is insensible for animals weighing up to 27 kilogram;
- Detection area: 10 meters;
- A power supply of a sensor is 9V ... 16V DC
Passive infrared motion sensor is designed to register movement in 10 meters coverage range. It is pluggable to NetPing server room environmental monitoring units, particularly to one of IO lines.
When fixing movement, the detector switches a status of an IO line for more than 1 second.
Usually, this motion detector is used to monitor access to server rooms with equipment.
Information about a sensor plugin is in the document "User Guide" for a NetPing device, to which you connect a sensor. Information about configuring a sensor and its functionality is in the document "Firmware Description" for a NetPing device, to which you connect a sensor.
A pir motion sensor is packaged with an inseparable cable, with connectors on the ends. A cable length can be increased with the help of flat cable extenders of RC-4 sensor, which are sequentially plugged one into another. Or it can be done independently with the help of any wire with a minimum cross section of 0,4 mm². Maximum allowable length of a flat cable is 100 meters.
|Device suit||Sensor with modified cable, box|
|Device dimensions||70 x 50 x 40|
|Power voltage||9V ... 16V DC|
|Operating temperature range||-30°C ... +70°C|
|Water proof case||No|
|Sensor cord length||2 meters|
|The unit case||Plastic. 3mm ABS , 0.4mm HDPE in Lens area.|
|Detection method||Low noise Dual Element Pyroelectric sensor|
|Sensitivity||Analogue Standard & PI|
|Detection range||15m Standard, 10m PI|
|Detection speed||0.3 ... 3.0 m/s|
|Quiescent current||15 mA at 12V|
|Relay output||SELV limits; 60V DC, 50mA (42.4V AC peak)|
|Storage temperature||-40°C ... +80°C|
|Emissions||EN55022 Class B|
|Immunity||To new European Standard EN50130-4|
|Technical specifications Pyronix Colt Quad PI||Go to|