NetPing 2 IP PDU GSM3G R2

A siren alarm is designed to be plugged to NetPing server room environmental monitoring solutions. The siren allows to sound alert by a command from the interface of a NetPing device.

• 12V powered by a NetPing device;
  
• Loudness level is 105 dB

A controllable socket allows to turn on/turn off and restart power supply of 100V ... 240V AC, 50/60 Hz external load, with a current up to 10A. A socket has to be plugged into an IO line of a basic NetPing server room environmental monitoring solutions and power distribution units!

• Switching capacity up to 2 KW;
  
• Management from IO line of NetPing device;
• A possibility to be installed on DIN rail;
• A socket to plug a Euro plug

An adapter for NetPing power distribution units (PDU). A special cable-adapter for connecting a euro plug from a computer socket to a usual power outlet in a body of a NetPing PDUs.

• C14 plug on a cable;
  
• Euro plug (F type) on a cable;
• Up to 16A 110V ... 230V AC, 50/60 Hz

An universal adapter is designed to connect a power supply euro plug of a NetPing power distribution units (PDU) to a UPS socket (UPS, C13). In addition, an adapter can be used to plug a NetPing PDUs euro plug to a UPS socket (UPS, C13). A grounding contact of the adapter can be used with only a plug that has a pin as a grounding contact.

• Up to 16A 110V ... 230V 50/60Hz;
  
• Universal contacts to connect any plug;
• Can be plugged into a C13 socket (UPS)

It allows to extend the length of a cord loop for 4 meters. Cable extender can be sequentially plugged in each other to achieve a necessary length of a sensor cord loop.

• Cable length 4 meters;
  
• Flat 4-wire cable

A sensor allows detecting the power voltage in the power outlet.

• it is manufactured in the case of the power unit with the IEC320 C7 (IP20) socket. It can be plugged into any outlet using a detachable power cord.

• has the internal nodes powered from the grid and thus may maintain operation in the range between AC 70...250 V with the frequency of 50/60 Hz.

• Triggering threshold: 178–193 V.

• Releasing threshold: 155–175 V.

• The output type is «dry contact» / normally closed and normally opened contacts (built-in relay).

• Loop is 1,5 meter long.

The air flow sensor allows you to monitor the presence or absence of air pressure. It contains reed contacts ("dry contact"). It is connects to the IO line of a NetPing device.

• For cupboards heated by fan heaters;
  
• For remote control of the fan operation at any point of an object, air flow control: yes, no;
  
• The mechanical principle of operation;
  
• Universal application;
  
• Small size;
  
• A plastic case;
  
• The status of contacts: N.Z. (normally closed or closed);
  
• One-piece wire of 0.5 m long.
  

VT592 cable leak sensor is designed to work in conjunction with the WLC10 leak cable. The ability to connect the sensor to the IO line makes it easy to integrate it into almost any system built on NetPing power monitoring and management devices.

• Operating temperature range: -10°C ... 100 °C;
• Operating humidity range: 10% ... 90% (non-condensing);
• Triggering time: up to 15 seconds;
• A compact plastic case with a hole for mounting;
• Sensor of the "dry contact" type;
• A power supply of a sensor is 5V.

NetPing Light Sensor 813S2 is a compact luminous flux presence sensor designed to connect with NetPing devices.

• Threshold adjustment 10–7000 Lx;
• An adjustment step 10–300 Lx;
• A viewing angle 25–30°;
• Hysteresis 20%;
• Sensor triggering/release time from 1 s up to 20 s;
• An output type NPN, an open drain/dry contact connected to an IO-line of a NetPing device;
• An operating temperature range -30...+50°С without moisture condensation.