To buy
Ask a question



NetPing 2/PWR-220 v2/SMS


135 usd
На складе 01.01 нет данных

NetPing 2/PWR-220 v2/SMS

This is a device to remotely manage power supply sockets via Ethernet/Internet network (IP PDU). It supports using SMS management and has got a built-in battery

  • 2 controllable 220V sockets;
  • 2 х 10/100- BASE-TX Ethernet ports;
  • Connection to a WiFi network (using VAP11N);
  • A built-in battery to send notifications when there is no main power supply;
  • A built-in GSM modem for SMS-management and notifications;
  • Plastic compact case, "computer" sockets to plug in consumers;
  • External sensors are pluggable, such as: temperature, door, leakage, 220V sensors.

NetPing 2/PWR-220 v2/SMS device belongs to the class IP PDU (IP power distribution unit). These devices allow to remotely turn on, turn off and restart equipment by managing 220V sockets. Peculiarities of this device are: a built-in battery for sending notifications from sensors when there is no main power supply, a built-in GSM modem for performing management using SMS-commands, and a possibility to plug external sensors with SMS-notification feature.            

NetPing 2PWR-220 v2SMS - Panel with Etnernet ports

NetPing 2PWR-220 v2SMS - Panel with controlled outlets

Usually NetPing 2/PWR-220 v2/SMS is used to:

  • Remotely control power supply inside ATMs, vending machines, payment terminals, and other similar equipment. At the same time, a device can track internal conditions of equipment operation (for example, watch the operating temperature of a bill acceptor remained within the acceptable range), indicate problems via the Ethernet network as well as using SMS-commands. In case of external power supply termination, a device will stay connected using SMS-messages and will continue to monitor statuses of sensors.
  • Restart freezing modems, access points, routers, servers and other computer equipment with no need to access it physically. If a network is unavailable, the operation can be performed using an SMS-command. This allows to save efforts and charges that might be spent on numerous trips with the aim to turn on/turn off frozen hardware.
  • Remotely turn on/turn off additional computer equipment. Physical turning on backup servers, routers, access points can be performed when necessary in a manual or automatic mode as well as turning them off when their operation is unnecessary. This allows saving electricity and minimizing equipment wearout because hardware runs only from time to time or during certain periods of time.
  • Remotely turn on/turn off conference call monitors, monitors in a gaming club or an Internet cafe. Monitors can be controlled via the Ethernet/Internet network as well as using SMS-commands.
  • Remotely control air conditioners, ventilation and climate control systems. Connected sensors allow tracking current situation while a remote management of 220V sockets allow turning on a necessary system without physical presence, including automatic mode. A device can manage an air conditioner using IR commands! 

NetPing 2PWR-220 v2SMS - connected sensors

Management of Power Supply Sockets of NetPing 2/PWR-220 v2/SMS Device:

Remote Management of Device Sockets via the Ethernet/Internet Network

Each output socket of a device can be remotely switched on/switched off/reloaded. Sockets can be managed through a built-in web interface, with the help of any browser or using SNMP commands.

Sockets Remote Management with the Help of SMS Messages

Any socket of a device can be switched on/off or reloaded with the help of an SMS-message. It allows to control a power supply of a connected device even when the Ethernet/Internet network is down or unavailable.

A Watchdog for Automatic Reloading of an External Equipment

If any external device, a router or an access point freezes sometimes, NetPing can automatically reload these devices. To do this, it constantly inquires indicated IP addresses by the ping protocol. If it gets no response, it will automatically reload a connected device by turning off and turning on its power supply. 

Switching on/off Sockets on a Schedule

A device can switch on and off a voltage on its built-in sockets on its own on a weekly schedule, switch on/off a voltage several times a day, use a special schedule for holidays. This may be useful for a daily/weekly forced reboot of external devices or for turning off unused equipment in a certain time of a day. 

Pluggable Sensors and Monitoring Functions of NetPing 2/PWR-220 v2/SMS:

Email, SNMP TRAP, Syslog notifications about sensors triggering

When sensors, connected to a device, are triggered, the device can send the next notifications:

Email - using an external NetPing Notifier web-service is required as well as an Internet access for a device. Otherwise you can use locally installed software on any server to forward Email notifications.

SNMP TRAP - is convenient to use for integration with monitoring systems as well as for fulfilling automatic actions on a PC (for example, start playing an alarm) with the help of specific software.

Syslog - with the help of specific software installed on a PC (a syslog server), all messages from sensors can be stored in a text file for a following analysis.

SMS-Notifications from Sensors

When a sensor is triggered, a device can send an SMS-notification to an indicated phone number. It is convenient to use for the most critical sensors. A responsible employee will receive a notification to his/her cell phone regardless his/her location and Internet access. In addition, the notification does not depend on an Ethernet/Internet access/connection of the device.

 Temperature Sensors

External temperature sensors are extremely popular in monitoring systems. With their help, it is possible to control a temperature mode of a critical equipment operation as well as receive timely notifications about denials and failures in a climate control system, diagnose coolers failures and accidental ventilation flows overlaps. 

A Humidity Sensor

It allows to estimate a relative humidity of atmospheric air. It is commonly used to monitor optimum conditions of a computer equipment operation in server rooms.

 A Door Opening/Closing Sensor

It performs security and monitoring functions. It helps to track opening/closing of a door into a server room or the same of a door to a switch cabinet with equipment.

 220 V Occurrence Sensor

This sensor allows to detect a presence or an absence of 220 V voltage in a power supply socket, to which a sensor is connected. A common use of this sensor is to receive notifications when a voltage in the electrical network disappears. At the same time, the device must be powered by UPS or a battery, or a backup power line.

 A Leakage Sensor

Allows to determine a water on a floor of a server room or on a bottom of a wiring closet. In a case of flooding (a breakage in a water or heating system) this sensor allows to give advance notice to a responsible employee about a contingency. Also this sensor can be useful to control leakage in a conditioner condensing system.

Ease of Use, Simple Integration into Existing Systems, Reliability:

Works 24 hours/ 7 Days a Week, with No Hang-ups

A device is designed for an uninterrupted operation in an unattended room in 24/7 mode. A built-in power supply supervisor protects a device from hang-ups when there are voltage fluctuations. We do not use operating systems when developing software. The entire code is written by us on a C language completely, and the code is highly optimized for the provided functionality.


A built-in battery is used to send notifications about detections of sensors when there is no main power supply.

When a main power supply disappears, a device will continue operating from a built-in battery, and sensors will keep functioning as well. A device can notify of a lack of power supply via SMS, Email or SNMP TRAP. A built-in battery will provide 2-3 hours of autonomous operation (when Ethernet interface is running) and more than 10 hours of autonomous operation of a device when Ethernet interface is off.

Connecting to an Ethernet Network, a Static IP Address 

A device is connected to a common office Ethernet network, into any available port of an Ethernet switch. Having published an IP address of a device in the Internet, it is possible to manage device sockets from anywhere in the world.


An Embedded Web Server

A device is managed and configured through a browser. Specific software is not needed. Operates in any OS (Windows, Linux, Mac). 

Authorization and Access Restriction

An access to a web interface of a device is protected with a login and password, set by a user. There is a need to authorize to get to a web interface of a device. Besides, it is possible to restrict an access to a device, having left an access from a specified IP subnetwork only. 

SNMP Support

An SNMP protocol is widely used in data collection systems for network equipment. A device supports management commands as well as receives information from sensors via an SNMP protocol. A device is easily integrated with network monitoring systems, such as Zabbix,  PRTG Network Monitor and similar ones, which receive data on a status of sensors, connected to a device through an SNMP protocol. 

Nonvolatile Clock and Time Synchronization with NTP

 To execute commands in a fixed specific time (a module Schedule), it is crucially important for a clock not to shift. Time tags are used for records in a log file as well. A device has its own built-in nonvolatile clock and a possibility to automatically sync with external time server via an NTP protocol. 

Firmware Update

A device supports updating firmware through a web-interface of a device. We occasionally release updates for firmware. The updates are free of charge. 

Nonvolatile Log File

All events (turning devices on and off, information from sensors) are stored in a nonvolatile memory. The information is stored even when a power supply cuts off. 

URL-encoded Commands Support

A device supports sockets management and receiving information from sensors with the help of specific HTTP commands. These commands allow managing a device from any web page, developed by a user, including any mobile application. 

Syslog Support

This protocol together with dedicated server software can be used for collecting text log files of different devices operation in a network, including Netping devices. This can be very useful for collecting and analyzing statistics. 

Automation on the Basis of NetPing 2/PWR-220 v2/SMS:

Automation and Logic Rules Execution (LOGIC)

A device allows setting certain logic rules, which will be executed by a device automatically. For example, to switch on a voltage, to turn on a notification alarm or a signal lamp, when a temperature on a temperature sensor exceeds indicated values, and automatically turn off a notification when a temperature is back to normal. Such rules allow implementing a simple automation system on a basis of a device.

Automatic Air Conditioner Control by IR Commands 

With the help of an extra module IRC-TR v2 and an embedded LOGIC module a device can automatically turn on an external air conditioner, by sending it an IR command when a temperature on a sensor exceeds, and then automatically turn it off, when a temperature is back to normal. The same way it is possible to turn on a standby air conditioners, which are turned off most of the time.

 Automatic Management of External Devices via SNMP

Embedded logic rules allow managing other NetPing devices through a network by sending them a snmpset command when a condition works. It can be useful to turn on an indication/notification in another building when a sensor is triggered in a server room, for example. Regardless a device with a sensor location as well as an indication device location, a command will be executed if they have a network connection.

Even More Possibilities When Using Additional Devices with NetPing 2/PWR-220 v2/SMS:

Managing Devices via IR. Turning On/Off an Air Conditioner with the Help of Sending an IR Command

With an extra IRC-TR v2 module (a module is purchased separately) there is a possibility to send a control command to any external device, which is managed from an IR control panel. A command can be sent from a Web-interface of a device or given via an SNMP protocol. For example, it is possible to manage a remote air conditioner in a server room, turning it on/off when necessary. Another example is remote switching of satellite receiver channels.

Connecting a Device to an Existing WiFi Network

If there is no Ethernet network in a place of a device installation, but there is a WiFi network, it is possible to connect a device to a WiFi network with the help of a VAP11N module (optional purchase). This allows avoiding a necessity to lay a wired Ethernet network to a place of a device installation. You can simply use an existing wireless infrastructure.

Device dimenstions 145 x 78 x 57
Device suit Device, GSM antenna, rubber pads, screwdriver, zip package, box
Pack box dimenstions 225 x 93 x 82
Power plug Euro plug, non removable cable 1.2 m.
Power voltage 110V...230V
Thermal range 0C .. +40C
Weight 640 g.
Own power consuption 5 W
Battery life 10 hours
220V sensor to 4
Door sensor to 4
IO lines 4
IR transiever Yes, external module IRC-TR v2
Luiquid sensors to 4
Thermo sensors to 8, TS or WT types
Independent internal power supply for sensors Yes
Humidity sensors Yes, 1 humidity sensor WS-2
1-wire sensors support No
Smoke sensors No
Motion sensor No
Shock sensors No
Glass sensors No
Buzzer No
Controllable socket NetPing AC/DIN to 4pcs sockets
Power control
Number of independent power channels 2
Power schedule Yes
Number of power souces 1
Short protect circuit Internal multiuse fuse
Summary output power 1 KW
WhatchDog function Yes
Individual socket output power 1 KW
Ethernet port 2 x 10/100 BASE-TX
Fanless solution Yes
Firmware update Yes
Static IP and MAC Yes
Email notifications Yes
Get time from NTP Yes
Internal log Yes
LOGIC support Yes
SMS commands Yes
SMS notifications Yes
SNMP control Yes, SNMP v1
SNMP trap Yes, SNMP v1
Syslog support Yes
Telnet No
Url-encoded comands Yes
Power dissapear notifications Yes
Документация и файлы
Подключаемые устройства



220V sensor


220V sensor
18 usd



Liquid sensor (mod.2605)


Liquid sensor (mod.2605)
38 usd



Humidity sensor WS-2


Humidity sensor WS-2
42 usd



Temperature sensor T811, 2m


Temperature sensor T811, 2m
19 usd



Adapter PWR-220


Adapter PWR-220
18 usd



Adapter WA-320


Adapter WA-320
18 usd



NetPing AC/DIN


NetPing AC/DIN
27 usd



Cable 4 extender, 4m


Cable 4 extender, 4m
9 usd



VAP11N Wifi bridge


VAP11N Wifi bridge
45 usd

-+ usd usd
Subtotal usd

Your Order