To buy
phone:+886-2-23121582
e-mail:sales@netpingdevice.com
Ask a question
phone:+886-2-23121582
e-mail:support@netpingdevice.com

84

88f0327b-0d9e-4206-b59d-5ad21fb0b466

NetPing 2/PWR-220 v3/ETH

netping-2-pwr-220-v3-eth

http://www.netping.ru/Pub/Photos/_nping_power_ETH_2PWR220_v2_small.png

84 usd
На складе 01.01 нет данных

NetPing 2/PWR-220 v3/ETH

A device for a remote management of power supply sockets via Ethernet/Internet network (IP PDU)

  • 2 controlled 220 V sockets;
  • 2 х 10/100- BASE-TX Ethernet-port;
  • Connection to WiFi-network (with the help of VAP11N);
  • Plastic compact body, computer sockets to plug consumers;
  • External sensors can be connected: temperature, door, leakage, 220 V occurrence.
Описание

NetPing 2/PWR-220 v3/ETH device belongs to the class IP PDU (IP power distribution unit) of devices. These devices allow remote (through a web-interface of a device or with the help of SNMP-commands) turning on, turning off and rebooting of equipment by managing 220V sockets.

NetPing 2PWR-220 v3ETH - Panel with Etnernet ports

NetPing 2PWR-220 v3ETH - Panel with controlled outlets

Usually NetPing 2/PWR-220 v3/ETH is used for:

  • Rebooting hangup modems, access points, routers, servers and other computer equipment with no need to access it physically. This allows to reduce costs and efforts spent on a lot of trips with the aim to turn on/turn off a hungup hardware;
  • Remote turning on/turning off additional computer equipment. Physical turning on backup servers, routers, access points can be done when necessary in a manual or an automatic mode as well as turning them off when there is no more such necessity. This allows to save electricity and reduce wearout of equipment, which operates only sometimes or in certain periods of time;
  • Remote turning on/turning off conference monitors, monitors in a gaming club or in an Internet cafe;
  • Remote management of air-conditioners, ventilation systems and climate control systems. Connected sensors allow to monitor a current situation, and remote management of 220 V sockets allows to turn on a necessary system with no physical presence on an object, including an automatic mode. A device can manage an air-conditioner with the help of IR-commands! An example of a ready solution: "Thermostat on a basis of NetPing 2/PWR-220 v1/SMS".

NetPing 2PWR-220 v3ETH - connected sensors

Power Supply Sockets Management of NetPing 2/PWR-220 v3/ETH Device:

Remote Management of Device Sockets via the Ethernet/Internet Network

Each output socket of a device can be remotely switched on/switched off/reloaded. Sockets can be managed through a built-in web interface, with the help of any browser or using SNMP commands.

A Watchdog for Automatic Reloading of an External Equipment

If any external device, a router or an access point freezes sometimes, NetPing can automatically reload these devices. To do this, it constantly inquires indicated IP addresses by the ping protocol. If it gets no response, it will automatically reload a connected device by turning off and turning on its power supply. 

Switching on/off Sockets on a Schedule

A device can switch on and off a voltage on its built-in sockets on its own on a weekly schedule, switch on/off a voltage several times a day, use a special schedule for holidays. This may be useful for a daily/weekly forced reboot of external devices or for turning off unused equipment in a certain time of a day. 

Pluggable Sensors and Monitrong Functions of NetPing 2/PWR-220 v3/ETH:

Email, SNMP TRAP, Syslog notifications about sensors triggering

When sensors, connected to a device, are triggered, the device can send the next notifications:

Email - using an external NetPing Notifier web-service is required as well as an Internet access for a device. Otherwise you can use locally installed software on any server to forward Email notifications.

SNMP TRAP - is convenient to use for integration with monitoring systems as well as for fulfilling automatic actions on a PC (for example, start playing an alarm) with the help of specific software.

Syslog - with the help of specific software installed on a PC (a syslog server), all messages from sensors can be stored in a text file for a following analysis.

 Temperature Sensors

External temperature sensors are extremely popular in monitoring systems. With their help, it is possible to control a temperature mode of a critical equipment operation as well as receive timely notifications about denials and failures in a climate control system, diagnose coolers failures and accidental ventilation flows overlaps. 

A Humidity Sensor

It allows to estimate a relative humidity of atmospheric air. It is commonly used to monitor optimum conditions of a computer equipment operation in server rooms.

 A Door Opening/Closing Sensor

It performs security and monitoring functions. It helps to track opening/closing of a door into a server room or the same of a door to a switch cabinet with equipment.

 220 V Occurrence Sensor

This sensor allows to detect a presence or an absence of 220 V voltage in a power supply socket, to which a sensor is connected. A common use of this sensor is to receive notifications when a voltage in the electrical network disappears. At the same time, the device must be powered by UPS or a battery, or a backup power line.

 A Leakage Sensor

Allows to determine a water on a floor of a server room or on a bottom of a wiring closet. In a case of flooding (a breakage in a water or heating system) this sensor allows to give advance notice to a responsible employee about a contingency. Also this sensor can be useful to control leakage in a conditioner condensing system.

Usability, Easy Integration into Existing Systems, Reliability:

Works 24 hours/ 7 Days a Week, with No Hang-ups

A device is designed for an uninterrupted operation in an unattended room in 24/7 mode. A built-in power supply supervisor protects a device from hang-ups when there are voltage fluctuations. We do not use operating systems when developing software. The entire code is written by us on a C language completely, and the code is highly optimized for the provided functionality.

 

Connecting to an Ethernet Network, a Static IP Address 

A device is connected to a common office Ethernet network, into any available port of an Ethernet switch. Having published an IP address of a device in the Internet, it is possible to manage device sockets from anywhere in the world.

 

2 Ethernet Ports on a Body of a Device

They allow using one port to connect a device to an Ethernet switch, and the second one as a common Ethernet port to plug any Ethernet devices, including other NetPing devices, in a chain. This can be extremely useful when all ports of a switch are already occupied: NetPing can be plugged into a switch, and a network device can be plugged into an available Ethernet port.

An Embedded Web Server

A device is managed and configured through a browser. Specific software is not needed. Operates in any OS (Windows, Linux, Mac). 

Authorization and Access Restriction

An access to a web interface of a device is protected with a login and password, set by a user. There is a need to authorize to get to a web interface of a device. Besides, it is possible to restrict an access to a device, having left an access from a specified IP subnetwork only. 

SNMP Support

An SNMP protocol is widely used in data collection systems for network equipment. A device supports management commands as well as receives information from sensors via an SNMP protocol. A device is easily integrated with network monitoring systems, such as Zabbix,  PRTG Network Monitor and similar ones, which receive data on a status of sensors, connected to a device through an SNMP protocol. 

Time Synchronization with NTP Servers

A device does not have a built-in nonvolatile clock, therefore a device uses a constant synchronization with time sources in the Internet (NTP servers). Synchronization with sources of an accurate time is important for a function Schedule operation as well as for accurate time tags in a device log file.  

Firmware Update

A device supports updating firmware through a web-interface of a device. We occasionally release updates for firmware. The updates are free of charge. 

Nonvolatile Log File

All events (turning devices on and off, information from sensors) are stored in a nonvolatile memory. The information is stored even when a power supply cuts off. 

URL-encoded Commands Support

A device supports sockets management and receiving information from sensors with the help of specific HTTP commands. These commands allow managing a device from any web page, developed by a user, including any mobile application. 

Syslog Support

This protocol together with dedicated server software can be used for collecting text log files of different devices operation in a network, including Netping devices. This can be very useful for collecting and analyzing statistics. 

Automation on a Basis of NetPing 2/PWR-220 v1/SMS:

Automation and Logic Rules Execution (LOGIC)

A device allows setting certain logic rules, which will be executed by a device automatically. For example, to switch on a voltage, to turn on a notification alarm or a signal lamp, when a temperature on a temperature sensor exceeds indicated values, and automatically turn off a notification when a temperature is back to normal. Such rules allow implementing a simple automation system on a basis of a device.

Automatic Air Conditioner Control by IR Commands 

With the help of an extra module IRC-TR v2 and an embedded LOGIC module a device can automatically turn on an external air conditioner, by sending it an IR command when a temperature on a sensor exceeds, and then automatically turn it off, when a temperature is back to normal. The same way it is possible to turn on a standby air conditioners, which are turned off most of the time.

Even More Possibilities When Using Additional Devices with NetPing 2/PWR-220 v1/SMS:

Managing Devices via IR. Turning On/Off an Air Conditioner with the Help of Sending an IR Command

With an extra IRC-TR v2 module (a module is purchased separately) there is a possibility to send a control command to any external device, which is managed from an IR control panel. A command can be sent from a Web-interface of a device or given via an SNMP protocol. For example, it is possible to manage a remote air conditioner in a server room, turning it on/off when necessary. Another example is remote switching of satellite receiver channels.

Connecting a Device to an Existing WiFi Network

If there is no Ethernet network in a place of a device installation, but there is a WiFi network, it is possible to connect a device to a WiFi network with the help of a VAP11N module (optional purchase). This allows avoiding a necessity to lay a wired Ethernet network to a place of a device installation. You can simply use an existing wireless infrastructure.

Спецификация
Phisicals
Power plug Euro plug, non removable cable 1.2 m.
Device dimenstions 145 x 78 x 57
Device suit Device, rubber pads, screwdriver, zip package, box
Pack box dimenstions 225 x 93 x 82
Power voltage 110V...230V
Weight 538 g.
Thermal range 0C .. +40C
Own power consuption 4 W
Sensors
220V sensor to 4
Door sensor to 4
IO lines 4
IR transiever Yes, external module IRC-TR v2
Luiquid sensors to 4
Thermo sensors to 8, TS or WT types
Humidity sensors Yes, 1 humidity sensor WS-2
1-wire sensors support No
Smoke sensors No
Motion sensor No
Shock sensors No
Glass sensors No
Buzzer No
Controllable socket NetPing AC/DIN to 4pcs sockets
Power control
Number of independent power channels 2
Short protect circuit Internal multiuse fuse
Summary output power 1 KW
WhatchDog function Yes
Power schedule Yes
Number of power souces 1
Individual socket output power 1 KW
Base
Static IP and MAC Yes
Firmware update Yes
Ethernet port 2 x 10/100 BASE-TX
Fanless solution Yes
Functions
Email notifications Yes
Get time from NTP Yes
Internal log Yes
LOGIC support Yes
SNMP control Yes, SNMP v1
SNMP trap Yes, SNMP v1
Syslog support Yes
Telnet No
Url-encoded comands Yes
Документация и файлы
Подключаемые устройства

18

f7485ac4-0161-4e24-b22a-26555c260624

220V sensor

voltage-sensor

http://www.netping.ru/Pub/Photos/_acces_sensr_sensor220V_small.png

220V sensor
18 usd

38

ae5e2d4a-aa83-4113-8389-7dd9ba91439f

Liquid sensor (mod.2605)

water-sensor

http://www.netping.ru/Pub/Photos/_acces_sensr_water_sensr_small.png

Liquid sensor (mod.2605)
38 usd

42

07553783-81b3-4eba-a7da-352f4427fa54

Humidity sensor WS-2

humidity-sensor-ws2

http://www.netping.ru/Pub/Photos/_acces_sensr_HumidityWS2_small.png

Humidity sensor WS-2
42 usd

19

92bcb641-f646-4be6-abc6-49f6837cb4b8

Temperature sensor T811, 2m

thermo-sensor-t-811-30

http://www.netping.ru/Pub/Photos/_acces_sensr_Temperature_sensor_T811_small.png

Temperature sensor T811, 2m
19 usd

18

fd8d92ce-6b51-480c-801f-baa148704d75

Adapter PWR-220

adapter-ups-with-cord

http://www.netping.ru/Pub/Photos/_acces_mains_Adapter_PWR220_small.png

Adapter PWR-220
18 usd

18

938d798b-d4c7-4cb1-940a-e5562aa8258e

Adapter WA-320

adapter-ups

http://www.netping.ru/Pub/Photos/_acces_mains_UPS_adapter_small.png

Adapter WA-320
18 usd

27

1ccc60b5-6cdd-4d8b-9d08-1e4d93bc471e

NetPing AC/DIN

netping-ac-din-socket

http://www.netping.ru/Pub/Photos/_acces_mains_AC_DIN_socket_small.png

NetPing AC/DIN
27 usd

9

31fdb1f1-30f6-4748-9cd6-2e7bc5df11fe

Cable 4 extender, 4m

rc-extender-4m

http://www.netping.ru/Pub/Photos/_acces_mains_sensors_extender4_small.png

Cable 4 extender, 4m
9 usd

45

af06f20a-f29a-4b57-a366-d05135909063

VAP11N Wifi bridge

vap11n-wifi-bridge

http://www.netping.ru/Pub/Photos/_acces_mains_VAP11N_WiFi_small.png

VAP11N Wifi bridge
45 usd

140

6f06bc5f-8ea0-4af0-9af4-a8a8fbaa9dc3

NetPing SMS

netping-sms

http://www.netping.ru/Pub/Photos/_nping_bases_SMS_small.png

NetPing SMS
140 usd

-+ usd usd
Subtotal usd

Your Order