To buy
Ask a question



NetPing 8/PWR-220 v3/SMS


305 usd
На складе 01.01 нет данных

NetPing 8/PWR-220 v3/SMS

A Device of Power Supply Sockets Remote Management via anEthernet/Internet Network (IP PDU) with SMS Management Support

  • 8 controllable 220 V sockets;
  • 2 independent power supply inputs (automatic and switching between the inputs by a command);
  • 2 х 10/100- BASE-TX Ethernet ports;
  • Connection to a WiFi network (with the help of VAP11N);
  • A built-in GSM modem for SMS management and notification;
  • A metal body for installing into a 19' rack 1U;
  • External sensors are plugged in: a temperature, a door, a leakage, a 220 V occurrence.

A NetPing 8/PWR-220 v3/SMS device belongs to the IP PDU (IP power distribution unit) class of devices. These devices allow remote turning on, turning off and reloading of equipment by managing 220 V sockets.

Usually NetPing 8/PWR-220 v3/SMS Is Used to:

  • Reload modems, access points, routers, servers and other computer equipment that freezes with no need to access it physically. If a network is unavailable, this operation can be fulfilled via an SMS command. This allows to minimize efforts and expenses on a huge amount of trips with the aim to turn on/turon off/ reload a hung-up harware.
  • Remote turning on/turning off additional computer equipment. Physical turning on of a backup servers, routers, and access points can be done as needed, in a manual or automatic mode (as well as turning them off when there is no more such need). This allows to save electricity and reduce equipment wear out, because its work is required sometimes or in certain periods of time. 
  • Switch to a backup power supply input. Switching to a backup input can be fulfilled remotely by a command ot automatically, when a voltage disappears on the main input.
  • Remote turning on/turning off conference call displays, internet cafe or play centers displays. Displays can be managed both via Eternet/Internet network and with the help of SMS commands.
  • Remote management of air conditioners, ventilation systems and climate control systems. Connected sensors allow current situation surveillance, and a remote 220 V sockets management allows turning on a necessary system with no physical presence on an object, including automatic mode. A device can manage an air conditioner with the help of IR commands!

NetPing 8/PWR-220 v3/SMS Power Supply Sockets and Inputs Management:

Remote Management of Device Sockets via the Ethernet/Internet Network

Each output socket of a device can be remotely switched on/switched off/reloaded. Sockets can be managed through a built-in web interface, with the help of any browser or using SNMP commands.

Sockets Remote Management with the Help of SMS Messages

Any socket of a device can be switched on/off or reloaded with the help of an SMS-message. It allows to control a power supply of a connected device even when the Ethernet/Internet network is down or unavailable.

A Watchdog for Automatic Reloading of an External Equipment

If any external device, a router or an access point freezes sometimes, NetPing can automatically reload these devices. To do this, it constantly inquires indicated IP addresses by the ping protocol. If it gets no response, it will automatically reload a connected device by turning off and turning on its power supply. 

Switching on/off Sockets on a Schedule

A device can switch on and off a voltage on its built-in sockets on its own on a weekly schedule, switch on/off a voltage several times a day, use a special schedule for holidays. This may be useful for a daily/weekly forced reboot of external devices or for turning off unused equipment in a certain time of a day. 


 Automatic Switching from a Main Power Supply Input to a Backup One

When a power supply disappears on a main input, a device can automatically switch all sockets to powering from a backup input. When a power supply on a main input is recovered, a device can automatically switch sockets to a main input. Switching time between two inputs is several seconds, and for this period of time sockets of a device will be cut off power.

NetPing 8/PWR-220 v3/SMS Pluggable Sensors and Monitoring Functions:

Email,  SNMP TRAP, Syslog notifications about sensors triggering

When sensors, connected to a device, are triggered, the device can send the next notifications:

Email - a device can send Email messages directly through an SMTP server. Both notifications about sensors triggering and periodical reports about sensors status are sent via Email.

SNMP TRAP - is convenient to use for integration with monitoring systems as well as for fulfilling automatic actions on a PC (for example, start playing an alarm) with the help of specific software.

Syslog - with the help of specific software installed on a PC (a syslog server), all messages from sensors can be stored in a text file for a following analysis.

SMS-Notifications from Sensors

When a sensor is triggered, a device can send an SMS-notification to an indicated phone number. It is convenient to use for the most critical sensors. A responsible employee will receive a notification to his/her cell phone regardless his/her location and Internet access. In addition, the notification does not depend on an Ethernet/Internet access/connection of the device.

 Temperature Sensors

External temperature sensors are extremely popular in monitoring systems. With their help, it is possible to control a temperature mode of a critical equipment operation as well as receive timely notifications about denials and failures in a climate control system, diagnose coolers failures and accidental ventilation flows overlaps. 

 220 V Occurrence Sensor

This sensor allows to detect a presence or an absence of 220 V voltage in a power supply socket, to which a sensor is connected. A common use of this sensor is to receive notifications when a voltage in the electrical network disappears. At the same time, the device must be powered by UPS or a battery, or a backup power line.

 A Door Opening/Closing Sensor

It performs security and monitoring functions. It helps to track opening/closing of a door into a server room or the same of a door to a switch cabinet with equipment.

 A Leakage Sensor

Allows to determine a water on a floor of a server room or on a bottom of a wiring closet. In a case of flooding (a breakage in a water or heating system) this sensor allows to give advance notice to a responsible employee about a contingency. Also this sensor can be useful to control leakage in a conditioner condensing system.

Usability, Simple Integration into Existing Systems, Reliability:

Works 24 hours/ 7 Days a Week, with No Hang-ups

A device is designed for an uninterrupted operation in an unattended room in 24/7 mode. A built-in power supply supervisor protects a device from hang-ups when there are voltage fluctuations. We do not use operating systems when developing software. The entire code is written by us on a C language completely, and the code is highly optimized for the provided functionality.


An Embedded Web Server

A device is managed and configured through a browser. Specific software is not needed. Operates in any OS (Windows, Linux, Mac). 

Connecting to an Ethernet Network, a Static IP Address 

A device is connected to a common office Ethernet network, into any available port of an Ethernet switch. Having published an IP address of a device in the Internet, it is possible to manage device sockets from anywhere in the world.


2 Ethernet Ports on a Body of a Device

They allow using one port to connect a device to an Ethernet switch, and the second one as a common Ethernet port to plug any Ethernet devices, including other NetPing devices, in a chain. This can be extremely useful when all ports of a switch are already occupied: NetPing can be plugged into a switch, and a network device can be plugged into an available Ethernet port.

Authorization and Access Restriction

An access to a web interface of a device is protected with a login and password, set by a user. There is a need to authorize to get to a web interface of a device. Besides, it is possible to restrict an access to a device, having left an access from a specified IP subnetwork only. 

SNMP Support

An SNMP protocol is widely used in data collection systems for network equipment. A device supports management commands as well as receives information from sensors via an SNMP protocol. A device is easily integrated with network monitoring systems, such as Zabbix,  PRTG Network Monitor and similar ones, which receive data on a status of sensors, connected to a device through an SNMP protocol. 

Syslog Support

This protocol together with dedicated server software can be used for collecting text log files of different devices operation in a network, including Netping devices. This can be very useful for collecting and analyzing statistics. 

URL-encoded Commands Support

A device supports sockets management and receiving information from sensors with the help of specific HTTP commands. These commands allow managing a device from any web page, developed by a user, including any mobile application. 

Firmware Update

A device supports updating firmware through a web-interface of a device. We occasionally release updates for firmware. The updates are free of charge. 

Nonvolatile Log File

All events (turning devices on and off, information from sensors) are stored in a nonvolatile memory. The information is stored even when a power supply cuts off. 

Nonvolatile Clock and Time Synchronization with NTP

 To execute commands in a fixed specific time (a module Schedule), it is crucially important for a clock not to shift. Time tags are used for records in a log file as well. A device has its own built-in nonvolatile clock and a possibility to automatically sync with external time server via an NTP protocol. 

Automation on a Basis of NetPing 8/PWR-220 v3/SMS:

Automation and Logic Rules Execution (LOGIC)

A device allows setting certain logic rules, which will be executed by a device automatically. For example, to switch on a voltage, to turn on a notification alarm or a signal lamp, when a temperature on a temperature sensor exceeds indicated values, and automatically turn off a notification when a temperature is back to normal. Such rules allow implementing a simple automation system on a basis of a device.

Automatic Air Conditioner Control by IR Commands 

With the help of an extra module IRC-TR v2 and an embedded LOGIC module a device can automatically turn on an external air conditioner, by sending it an IR command when a temperature on a sensor exceeds, and then automatically turn it off, when a temperature is back to normal. The same way it is possible to turn on a standby air conditioners, which are turned off most of the time.

 Automatic Management of External Devices via SNMP

Embedded logic rules allow managing other NetPing devices through a network by sending them a snmpset command when a condition works. It can be useful to turn on an indication/notification in another building when a sensor is triggered in a server room, for example. Regardless a device with a sensor location as well as an indication device location, a command will be executed if they have a network connection.

Even More Possibilities When Using Extra Devices with NetPing 8/PWR-220 v3/SMS:

Managing Devices via IR. Turning On/Off an Air Conditioner with the Help of Sending an IR Command

With an extra IRC-TR v2 module (a module is purchased separately) there is a possibility to send a control command to any external device, which is managed from an IR control panel. A command can be sent from a Web-interface of a device or given via an SNMP protocol. For example, it is possible to manage a remote air conditioner in a server room, turning it on/off when necessary. Another example is remote switching of satellite receiver channels.

Connecting a Device to an Existing WiFi Network

If there is no Ethernet network in a place of a device installation, but there is a WiFi network, it is possible to connect a device to a WiFi network with the help of a VAP11N module (optional purchase). This allows avoiding a necessity to lay a wired Ethernet network to a place of a device installation. You can simply use an existing wireless infrastructure.



Power plug Euro plug
Device dimenstions 430 х 152 х 44
Device suit Device, GSM antenna, power cable 1.8 m. from the spec. connector 2 pcs., rack mount 2 pcs., fasteners 4 pcs., screwdriver, zip package, memo, box
Pack box dimenstions 515 х 253 х 62
Power voltage 110 V ... 230 V
Thermal range 0°C ... 40°C
Weight 2700 gramm
Own power consuption 7 W
220V sensor To 4 pcs. sensors
Door sensor To 4 pcs. sensors
Humidity sensors Yes, 1 humidity sensor 1-wire
IO lines 4 IO lines
IR transiever Yes, external IRC-TR v2 module
Luiquid sensors To 4 pcs. sensors
RS232 port No
RS485 port No
Shock sensors No
Smoke sensors No
Thermo sensors To 8 pcs. sensors THS type
1-wire sensors support Yes
Motion sensor No
Buzzer No
Controllable socket NetPing AC/DIN To 4 pcs. sockets
Power control
Number of independent power channels 8 channels
Number of power souces 2 independent power sources 110 V ... 230 V each
Short protect circuit Internal multiuse fuse
Summary output power 1750 W per 4 output sockets, 3500 W per 8 output sockets
WhatchDog function Yes, for 8 output sockets
Power schedule Yes
Individual socket output power 1,5 KW
Static IP and MAC Yes
Firmware update Yes
Ethernet port 2 x 10/100 BASE-TX
Fanless solution Yes
Email notifications Yes
Get time from NTP Yes
Internal log Yes
LOGIC support Yes
SMS notifications Yes
SNMP control Yes, SNMP v1
SNMP trap Yes, SNMP v1
Syslog support Yes
Telnet No
Url-encoded comands Yes
SMS commands Yes
Документация и файлы
Подключаемые устройства



220V sensor


220V sensor
18 usd



Temperature 1-wire, (THS), 2m


Temperature 1-wire, (THS), 2m
19 usd



Liquid sensor (mod.2605)


Liquid sensor (mod.2605)
38 usd



Adapter PWR-220


Adapter PWR-220
18 usd



Adapter WA-320


Adapter WA-320
18 usd



NetPing AC/DIN


NetPing AC/DIN
27 usd



NetPing IRC-TR v2


NetPing IRC-TR v2
39 usd



Cable extender 1-wire, 5m


Cable extender 1-wire, 5m
11 usd



Cable extender 1-wire, 10m


Cable extender 1-wire, 10m
12 usd



Cable extender 1-wire, 2m


Cable extender 1-wire, 2m
9 usd



VAP11N Wifi bridge


VAP11N Wifi bridge
45 usd



NetPing SMS


NetPing SMS
140 usd

-+ usd usd
Subtotal usd

Your Order