Cable 4 extender, 4m

A door position sensor. The sensor is designed to be mounted on a metal door of a cabinet or a server room. It contains reed contacts ("dry contact"). For NetPing server room environmental monitoring solutions and power distribution units.

• Reed contacts of the sensor close when a magnet approaches;
  
• The sensor is to be mounted on a door of a server room or a cabinet with equipment;
• It is a patch sensor, designed to be mounted on metal surfaces

A motion sensor is designed to register movement. Allows to register any movement in a 10 meters area. It is connected to NetPing server room environmental monitoring solutions.

• It is insensible for animals weighing up to 27 kilogram;
  
• Detection area: 10 meters;
• A power supply of a sensor is 9V ... 16V DC

A siren alarm is designed to be plugged to NetPing server room environmental monitoring solutions. The siren allows to sound alert by a command from the interface of a NetPing device.

• 12V powered by a NetPing device;
  
• Loudness level is 105 dB

An IR module for devices remote control via TCP/IP network (web, SNMP, HTTP API) and SMS-commands with an IR interface (for example, remote control for air conditioner). It is not an independent device and it must be connected to a basic NetPing server room environmental monitoring solutions and power distribution units!

• Is trained from an original remote control;
  
• Reproduces up to 16 IR commands, saved in a memory of a module;
• Cable length to a basic device is up to 10 meters;
• A body of a device is in a form of a dome camera

A controllable socket allows to turn on/turn off and restart power supply of 100V ... 240V AC, 50/60 Hz external load, with a current up to 10A. A socket has to be plugged into an IO line of a basic NetPing server room environmental monitoring solutions and power distribution units!

• Switching capacity up to 2 KW;
  
• Management from IO line of NetPing device;
• A possibility to be installed on DIN rail;
• A socket to plug a Euro plug

A sensor allows detecting the power voltage in the power outlet.

• it is manufactured in the case of the power unit with the IEC320 C7 (IP20) socket. It can be plugged into any outlet using a detachable power cord.

• has the internal nodes powered from the grid and thus may maintain operation in the range between AC 70...250 V with the frequency of 50/60 Hz.

• Triggering threshold: 178–193 V.

• Releasing threshold: 155–175 V.

• The output type is «dry contact» / normally closed and normally opened contacts (built-in relay).

• Loop is 1,5 meter long.

The air flow sensor allows you to monitor the presence or absence of air pressure. It contains reed contacts ("dry contact"). It is connects to the IO line of a NetPing device.

• For cupboards heated by fan heaters;
  
• For remote control of the fan operation at any point of an object, air flow control: yes, no;
  
• The mechanical principle of operation;
  
• Universal application;
  
• Small size;
  
• A plastic case;
  
• The status of contacts: N.Z. (normally closed or closed);
  
• One-piece wire of 0.5 m long.
  

Ethernet / Internet Controlled Remote Power Distribution Unit (IP PDU) with SMS Control Support

• 2 independent controlled power sockets 100V .. 250V;
  
• 2 х 10/100-BASE-TX Ethernet-Ports;
  
• a built-in ionistor for sending notifications when the main power is turned off;
  
• the ability to connect an external battery pack;
  
• a buit-in 3G GSM-modem for SMS control and SMS notifications;
  
• the plastic compact case, “computer” sockets for connecting consumers;
  
• operating temperature range: -30°C .. +50°C (non-condensing, normal humidity);
  
• external sensors are connected: temperature sensors, humidity sensors, door sensor metal, liquid sensors, power supply sensors and others.
  

A device of power supply sockets remote management via Ethernet/Internet network (IP power distribution unit) with SMS management support.

• 4 controllable sockets (IEC320-C13);
• 2 x 10/100-BASE-TX Ethernet ports;
• A built-in 3G GSM modem for SMS management and notification;
• Built-in ionistor for the operation of the warning system in the absence of 220 V;
• Ability to connect the battery module;
• A metal body for installing into a 10' rack 1U or mounting on a flat surface;
• External 1-wire sensors can be connected: temperature, humidity, supply voltage, analog sensor adapter;
• 6 I/O lines for connecting external sensors of "dry contact" type;
• Operating temperature range: -30...50 °C (no condensation, normal humidity).

A device of power supply sockets remote management via Ethernet/Internet network (IP power distribution unit) with SMS management support.

• 4 controllable sockets (JT-G45-120-4P, “Schuko” sockets, Type F);
• 2 x 10/100-BASE-TX Ethernet ports;
• A built-in 3G GSM modem for SMS management and notification;
• Built-in ionistor for the operation of the warning system in the absence of 220 V;
• Ability to connect the battery module;
• A metal body for installing into a 10' rack 1U or mounting on a flat surface;
• External 1-wire sensors can be connected: temperature, humidity, supply voltage, analog sensor adapter;
• 6 I/O lines for connecting external sensors of "dry contact" type;
• Operating temperature range: -30...50 °C (no condensation, normal humidity).
  

A device of power supply sockets remote management via Ethernet/Internet network (IP power distribution unit).

• 4 controllable sockets (JT-G45-120-4P, “Schuko” sockets, Type F);
• 2 x 10/100- BASE-TX Ethernet ports;
• A metal body for installing into a 10' rack 1U or mounting on a flat surface;
• External 1-wire sensors can be connected: temperature, humidity, supply voltage, analog sensor adapter;
• 6 I/O lines for connecting external sensors of "dry contact" type;
• Operating temperature range: -30...50 °C (no condensation, normal humidity).

VT592 cable leak sensor is designed to work in conjunction with the WLC10 leak cable. The ability to connect the sensor to the IO line makes it easy to integrate it into almost any system built on NetPing power monitoring and management devices.

• Operating temperature range: -10°C ... 100 °C;
• Operating humidity range: 10% ... 90% (non-condensing);
• Triggering time: up to 15 seconds;
• A compact plastic case with a hole for mounting;
• Sensor of the "dry contact" type;
• A power supply of a sensor is 5V.

This is a device for remote sensor monitoring via the Ethernet/Internet on a DIN rail. It allows you to receive information about the status of sensors and notifications about triggering of sensors, to control connected devices remotely.

• A compact case for mounting on a DIN rail;
• 1-wire sensors support;
• 16 Input and 4 Output lines for connecting external sensors and controlling external devices;
• 4 built-in low voltage relays;
• RS-232/485 port (TCP-COM);
• Support for external sensors: temperature sensors, humidity sensors, door metal sensors, liquid sensors, smoke detectors, supply voltage sensors and so on;
• 2 х 10/100-BASE-TX Ethernet ports;
• Power supply of the device using a 12V 2A power supply unit or an external module for NetPing 85M2 batteries.

This device is for remote monitoring of sensors via the Ethernet/Internet network. It allows you to control external devices and receive information about the conditions of sensors and notifications about a sensor status remotely.

• 2 х 10/100-BASE-TX Ethernet ports;
• A metal case with brackets for mounting on a DIN rail;
• 4 built-in 24 V changeover relays with an indication for switching;
• A built-in temperature sensor;
• 1-wire sensor support;
• 4 Input lines for connecting sensors of a “dry contact” type;
  
• External sensors are supported: temperature, humidity, door metal, liquid, voltage supply, motion and so on;
• Power of the device from POE (Power over Ethernet) or using a 12V 2А power battery.

This device is for remote monitoring of sensors via the Ethernet/Internet network. It allows receiving information about the status of sensors and notifications about sensor triggering remotely.

• A metal case for mounting on a 19' 1U rack;
• 1-Wire sensors support;
• 12 IO lines for connecting external sensors and controlling external devices;
• An analog input 0–30 mA, 0–30 V, 0–30 kOhm;
• Two built-in low voltage relays;
• 2 х 10/100-BASE-TX Ethernet ports.

The shock sensor allows registering shocks and vibration as well as loud bangs and acoustic shocks of the surface on which it has been installed. It is normally used to report vandalism at remote sites and equipment boxes.

• Connected to the IO-lines of NetPing devices;
• Independent two-level adjustment of the shock force;
• A patented piezo-spring element;
• High stability and reliability of its operation;
• The plastic case has a device for attaching the sensor to any surface;
• Contact conditions: N.O. contact (normally opened contacts);
• Sensor supply voltage +12 V, ± 20%;
• 6 I/O lines for connecting external sensors of "dry contact" type;
• Length of the wire 1 m.

NetPing Light Sensor 813S2 is a compact luminous flux presence sensor designed to connect with NetPing devices.

• Threshold adjustment 10–7000 Lx;
• An adjustment step 10–300 Lx;
• A viewing angle 25–30°;
• Hysteresis 20%;
• Sensor triggering/release time from 1 s up to 20 s;
• An output type NPN, an open drain/dry contact connected to an IO-line of a NetPing device;
• An operating temperature range -30...+50°С without moisture condensation.

This device is for remote monitoring of sensors via the Ethernet/Internet network. It allows receiving information about the status of sensors and notifications about sensor triggering remotely.

• A metal case for mounting on a 19' 1U rack;
• 1-Wire sensors support;
• 12 IO lines for connecting external sensors and controlling external devices;
• An analog input 0–30 mA, 0–30 V, 0–30 kOhm;
• Two built-in low voltage relays;
• Built-in GSM3G modem;
  
• 2 х 10/100-BASE-TX Ethernet ports.

This device is for remote monitoring of sensors via the Ethernet/Internet network. It allows receiving information about the status of sensors and notifications about sensor triggering remotely.

• A metal case for mounting on a 19' 1U rack;
• 1-Wire sensors support;
• 12 IO lines for connecting external sensors and controlling external devices;
• An analog input 0–30 mA, 0–30 V, 0–30 kOhm;
• Two built-in low voltage relays;
• 1 х 10/100-BASE-TX Ethernet port.

This device is for remote monitoring of sensors via the Ethernet/Internet network. It allows receiving information about the status of sensors and notifications about sensor triggering remotely.

• A metal case for mounting on a 19' 1U rack;
• 1-Wire sensors support;
• 12 IO lines for connecting external sensors and controlling external devices;
• An analog input 0–30 mA, 0–30 V, 0–30 kOhm;
• Two built-in low voltage relays;
• Built-in GSM3G modem;
  
• 1 х 10/100-BASE-TX Ethernet port.

A device of power supply sockets remote management via Ethernet/Internet network (Switched Metered ATS IP PDU) with SMS management support.

• 8 controllable 100V ... 240V AC, 50/60 Hz sockets;
  
• 2 independent power supply inputs (automatic and switching between the inputs by a command);
• 2 x 10/100-BASE-TX Ethernet ports;
• A built-in 3G GSM modem for SMS management and notification;
• A metal body for installing into a 19' rack 1U;
• External sensors can be connected: temperature, humidity, door, leakage, supply voltage and other

A device of power supply sockets remote management via Ethernet/Internet network (Switched Metered ATS IP PDU) with SMS management support.

• 8 controllable 100V ... 240V AC, 50/60 Hz sockets;
• 2 independent power supply inputs (automatic transfer switch);
• 1 x 10/100-BASE-TX Ethernet ports;
• A built-in 3G GSM modem for SMS management and notification;
• A metal body for installing into a 19' rack 1U;
• External sensors can be connected: temperature, humidity, door, leakage, supply voltage and other.

Remote Power Control Unit Over Ethernet (IP PDU) for 2 sockets C13.

• 2 independently controlled "computer" power sockets C13 (100V .. 250V);
• a plastic compact case;
• an ability to connect external sensors: temperature, humidity, leakage, door metal sensor, power supply, and others;
• optionally: a built-in 3G GSM modem for SMS control and SMS notifications;
• Ethernet ports 10/100-BASE-TX;
• an operating temperature range: -30°C .. +50°C (non-condensing, normal air humidity);
• optionally:  a built-in ionistor for sending notifications when the main power is turned off.

IR controller for remote and automatic control of devices with infrared interface via Ethernet (web, SNMP, HTTP API).

• Learned from the original remote control, stores and plays back up to 32 IR commands;
• Compact aluminum hanger housing with hinge;
• Supports 1-wire sensors;
• Supports two dry contact sensors with the ability to connect 2 control buttons;
• 2 x 10/100-BASE-TX Ethernet ports with POE broadcasting;
• Possibility of simultaneous power supply of the device from power supply and POE.

A Remote Power Distribution Unit (IP PDU) with controls over Ethernet and SMS

• 2 independently controlled "computer" power sockets C13 (100V .. 250V);

• a plastic compact case;

• connectors for external sensors: temperature, humidity, leakage, door open / close, power supply, and more;

• a built-in 3G GSM modem for SMS control and SMS notifications;

• Ethernet ports 10/100-BASE-TX;

• an operating temperature range: -30°C .. +50°C (non-condensing, normal air humidity);

• a built-in ionistor (supercapacitor) to send notifications in case of a main power supply failure.