NetPing global Ltd. announces a release of firmware updates for the devices NetPing 2/PWR-220 v3/ETH, NetPing 2/PWR-220 v1/SMS, NetPing, 2/PWR-220 v4/SMS. New firmware versions for devices allowed to make their operation more functional.
What have been changed in the last versions?
Firmware Version DKSF 52.9.1 DKSF 201.9.1 DKSF 202.9.1 from 16.06.2015:
- A new humidity sensor WS-2 is now supported. In previous firmware versions, humidity sensor operation was not supported in these devices;
- A full module for sending e-mail notifications is implemented. The module supports:
- sending notifications to up to four destination addresses simultaneously;
- working with SMTP servers without authorization, avoiding specifying a username and a password in the settings of the module;
- working with SMTP servers supporting authentication method AUTH LOGIN and AUTH PLAIN;
- a possibility to disable e-mail notifications;
- sending a periodic e-mail report about a status of sensors and IO lines according to an adjusted schedule;
- sending notifications to up to four destination addresses simultaneously;
- A new system of notifications from sensors and IO lines is implemented, which is adjusted in pop-up dialogs at the corresponding pages of a device web-interface;
- All types of notifications (Log, Syslog, SNMP TRAP, E-mail, and SMS) from IO lines in the modes «output» and «input» of a logic are added. In previous firmware versions, notifications worked only from IO lines in the mode «input»;
- All types of notifications (Log, Syslog, SNMP TRAP, E-mail, and SMS) about switching on/switching off a relay are added for all channels;
- A possibility to read a current status of an IO line regardless an operation mode is implemented via SNMP OID variable «npIoLevelIn», a device web interface, through SMS notifications and commands, and the module «Logic» for controlling an IO line in the modes «output» and «logic output»;
- A possibility to read a current status of a relay regardless an operation mode is implemented from a management mode via NMP OID variable «npPwrRelayState»;
- Commands for switching a status of IO lines and relays to opposite ones are implemented. For an IO line, there is a need to write a value «-1» into SNMP OID «npIoLevelOut», for a relay write a value «-1» into SNMP OID «npPwrRelayFlip»;
- Textual encoding of a logic level of an IO line is added at the page «Input-Output» of a device web interface and in SNMP TRAP notifications;
- An information about a model, a firmware version, and IMEI of a built-in GSM modem is added to a debugging log of a device, which is displayed at firmware start;
- An algorithm for rebooting devices is redesigned. Before, when updating a firmware version or reloading a device, they could freeze;
- An information about a name of a requested device is added into SMS notifications from the module «Pinger» at the page «SMS». Before, «Pinger» notified only about a response;
- A warning is added about a downgrade is undesirable without a prior consult from a technical support;
- A volume to store information of a system log of a device is increased for a more convenient analysis of events.
NetPing global Ltd. recommends to update firmware for devices NetPing 2/PWR-220 v3/ETH NetPing 2/PWR-220 v1/SMS NetPing 2/PWR-220 v4/SMS to the latest version. Updates are available at the official website in the section «files». Improvements to new firmware version will allow to improve quality and comfort of working with a device.
Contacts
netpingdevice.com - we develop, manufacture and sell monitoring devices for server rooms as well as for a remote monitoring.
Phone: +886-2-23121582
7F.-2, No.25, Sec. 1, Zhonghua Rd., Zhongzheng Dist., Taipei City 100, Taiwan (R.O.C.)
sales@netpingdevice.com
